Aleko AC 1500 Kullanıcı Kılavuzu - Sayfa 13

Kapı Açıcı Aleko AC 1500 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Aleko AC 1500 16 sayfaları. Sliding

DIP Switch #1– #2: Running time of the motor in Midway Mode

DIP Switch #1: ON –2 Seconds OFF –0

DIP Switch #2: ON –4 Seconds OFF –0

NOTE: The midway mode function would be disabled if both DIP switches are turned off. Factory

default setting is disabled.

E.g.

Running time of the operator in pedestrian mode is 2 seconds.

DIP Switch #3: Auto close function enabled/disabled

DIP Switch #3: ON –auto close function enabled

OFF –auto close function disabled

E.g.

Auto close function of the opener has been enabled. Factory default setting is disabled.

DIP Switch #4: Left/Right open

2. Potentiometers

Potentiometer A and B are used to adjust the stall force and auto close time of the gate operator separately.

Turn potentiometer A clockwise to increase the stall force, and turn it counter-clockwise to decrease the

stall force.

Turn potentiometer B clockwise to increase the auto close time, and turn it counter-clockwise to decrease

the auto close time, the auto close time could be adjusted steplessly from 1 to 99 seconds.