California Air Tools 1810C Manuel - Sayfa 6

Endüstriyel Ekipmanlar California Air Tools 1810C için çevrimiçi göz atın veya pdf Manuel indirin. California Air Tools 1810C 8 sayfaları. 10 gallon casting pressure pot

Sayfayı Yazdır

Trouble Shooting

WARNING!

If any of the following symptoms appears during your operating, stop using the tool immediately, or

serious personal injury could result.

Only a qualified persons or an authorized service center can perform repairs or replacement of tool.

Disconnect tool from air supply before attempting repair or adjustment. When replacing O-rings or

Cylinder, lubricate with air tool oil before assembly.

PROBLEMS

Air escaping from port on

regulator cap

Pressure dropping slowly

on gauge.

Air leak at the lid gasket.

POSSIBLE CAUSES

Broken or damaged

diaphragm in regulator.

Dirty or work valve seat in

regulator.

Defective lid gasket.

Thumb screw not tight.

CORRECTION

Replace regulator

Replace lid gasket.

Tighten thumb screws.