Clarke CPS160 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 8

Testere Clarke CPS160 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CPS160 17 sayfaları. 160 mm plunge saw

ELECTRICAL CONNECTIONS

WARNING: READ THESE ELECTRICAL SAFETY INSTRUCTIONS FULLY

BEFORE CONNECTING THE PRODUCT TO THE MAINS SUPPLY.

This product is provided with a standard 13 amp, 230 volt (50Hz), BS 1363 plug,

for connection to a standard, domestic electrical supply. Should the plug

need changing, make sure that a plug of identical specification is used.

WARNING: THE WIRES IN THE CABLE ARE COLOURED AS FOLLOWS:

BLUE = NEUTRAL

If the colours of the wires in the power cable do not correspond with the

markings on the terminals of your plug, proceed as follows.

• Connect the blue wire

to the terminal which

is marked N.

• Connect the brown

wire to the terminal

which is marked L.

We recommend that this plunge saw is connected to the mains supply via a

Residual Current Device (RCD)

If in doubt, consult a qualified electrician. DO NOT attempt any repairs yourself

This symbol indicates that this is a Class II product, and does not

require an earth connection.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]

BROWN = LIVE

Plug must be BS1363/A approved.

Neutral

(Blue)

make sure that the outer sheath of

the cable is firmly held by the clamp

Always fit

a 5 Amp

fuse.

Live

(Brown)