Clarke CPS160 Kullanım ve Bakım Talimatları Kılavuzu - Sayfa 9
Testere Clarke CPS160 için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları Kılavuzu indirin. Clarke CPS160 17 sayfaları. 160 mm plunge saw
![Clarke CPS160 Kullanım ve Bakım Talimatları Kılavuzu](/uploads/products/server2/723012/723012.jpg)
ADJUSTMENTS
DEPTH OF CUT ADJUSTMENT
The cutting depth can be adjusted from 0 to 55 mm.
1. Loosen the cutting depth
adjustment screw.
2. Set the required depth using the
scale.
3. Retighten the screw.
NOTE: The dimensions on the scale
shows the cutting depth
without the rail.
MITRE ADJUSTMENT
1. Loosen the mitre adjustment
screws on both sides.
2. Set the desired mitre angle.
• The mitre angle can be set from
0° to 45°. and is shown on the
Mitre Scale.
• Use the bevel scale as a guide
only, for accurate angles use a
protractor.
3. Retighten both mitre adjustment
screws to lock the base at the
required angle.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
9