Clarke CPS160 운영 및 유지보수 지침 매뉴얼 - 페이지 9

{카테고리_이름} Clarke CPS160에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPS160 17 페이지. 160 mm plunge saw

ADJUSTMENTS

DEPTH OF CUT ADJUSTMENT

The cutting depth can be adjusted from 0 to 55 mm.

1. Loosen the cutting depth

adjustment screw.

2. Set the required depth using the

scale.

3. Retighten the screw.

NOTE: The dimensions on the scale

shows the cutting depth

without the rail.

MITRE ADJUSTMENT

1. Loosen the mitre adjustment

screws on both sides.

2. Set the desired mitre angle.

• The mitre angle can be set from

0° to 45°. and is shown on the

Mitre Scale.

• Use the bevel scale as a guide

only, for accurate angles use a

protractor.

3. Retighten both mitre adjustment

screws to lock the base at the

required angle.

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]