Clarke CPS160 운영 및 유지보수 지침 매뉴얼 - 페이지 10

{카테고리_이름} Clarke CPS160에 대한 운영 및 유지보수 지침 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Clarke CPS160 17 페이지. 160 mm plunge saw

OPERATION & USE

• Secure the work piece so that it cannot be moved while sawing.

• Only move the saw in the forwards direction.

• When using a guide rail it must be fastened with suitable clamps.

• Make sure the power cable is kept well clear of the blade.

The plunge saw can be connected

to a dust extraction system using a

suitable hose adaptor (not supplied).

• Internal diameter is 34 mm

• External diameter is 38 mm

For your safety, grip the saw as shown

in this picture, with one hand on the

main handle and the other on the

front handle.

The on/off trigger is fitted with a safety button which prevents the saw from

being started accidentally. To start the saw:

1. Slide the plunge release button

upward and squeeze the on/off

trigger to start the saw.

2. Release the on/off trigger. and

allow the saw to spring up when

the saw cutting is complete.

• The blade will continue to

rotate for several seconds after

the trigger has been released

Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]