Clarke CPS160 Інструкція з експлуатації та технічного обслуговування - Сторінка 10
Переглянути онлайн або завантажити pdf Інструкція з експлуатації та технічного обслуговування для Пила. Clarke CPS160. Clarke CPS160 17 сторінок. 160 mm plunge saw
Друкувати сторінку
OPERATION & USE
• Secure the work piece so that it cannot be moved while sawing.
• Only move the saw in the forwards direction.
• When using a guide rail it must be fastened with suitable clamps.
• Make sure the power cable is kept well clear of the blade.
DUST EXTRACTION
The plunge saw can be connected
to a dust extraction system using a
suitable hose adaptor (not supplied).
• Internal diameter is 34 mm
• External diameter is 38 mm
CORRECT HAND POSITION
For your safety, grip the saw as shown
in this picture, with one hand on the
main handle and the other on the
front handle.
SWITCHING ON/OFF
The on/off trigger is fitted with a safety button which prevents the saw from
being started accidentally. To start the saw:
1. Slide the plunge release button
upward and squeeze the on/off
trigger to start the saw.
2. Release the on/off trigger. and
allow the saw to spring up when
the saw cutting is complete.
• The blade will continue to
rotate for several seconds after
the trigger has been released
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
10