Clarke CONTRACTOR DEVIL371PD Kullanım ve Bakım Talimatları - Sayfa 7
Isıtıcı Clarke CONTRACTOR DEVIL371PD için çevrimiçi göz atın veya pdf Kullanım ve Bakım Talimatları indirin. Clarke CONTRACTOR DEVIL371PD 17 sayfaları. Devil quartz halogen heater
Sayfayı Yazdır
UNPACKING AND ASSEMBLY
UNPACKING
Before assembling, please check contents against the following list and advise
your dealer immediately if any parts are missing.
1 x Heater
2 x Support Frames with castors (2 with brakes)
1 x Handle
1 x Fixings pack
1 X Remote control unit
ASSEMBLY
1. Attach the supporting frames to
the heater body using 14 mm
securing bolts supplied.
• The braked castors should be at
the rear of the heater
2. Attach the handle to each side of
the heater body using the 10 mm
bolts and plastic spacers.
• The handle should be facing
away from the rear of the
heater.
Parts & Service: 020 8988 7400 / E-mail: [email protected] or [email protected]
7