Nikon 2500 - Coolpix Digital Camera Ürün Yazılımı Güncelleme Kılavuzu - Sayfa 5

Dijital Kamera Nikon 2500 - Coolpix Digital Camera için çevrimiçi göz atın veya pdf Ürün Yazılımı Güncelleme Kılavuzu indirin. Nikon 2500 - Coolpix Digital Camera 8 sayfaları. Version 1.1

Sayfayı Yazdır

5. When the installer window is displayed, click "Continue" to install the

driver(s).

6. When installation is complete, a message reporting that the operation was

successful will be displayed. Click the "Restart" button to reboot the

computer and continue.

7. Follow the instructions in step 9.0, below, to use the Uploader to update the

camera's firmware.

9. 0 Installation of the Uploader Application- Windows

1. Download 2500V11wu.zip to your computer's desktop.

2. Decompress 2500V11wu.zip . This will create the folder "E2500V11"

containing the following files:

a. firmware.bin: firmware that will be installed in your camera

b. Uploader.exe: the uploader program

10.0 Upgrading the Firmware

1. Connect the camera to the computer with the USB cable.

2. Insert a Compact Flash card into the camera.

3. Connect the AC power adapter EH-60 to the camera and plug the power

cable into a power outlet. Users who prefer a battery power source should

insert a fully charged Nikon EN-EL2 rechargeable battery described above.

*The uploader may fail if a battery that is not fully charged is used.

4. Set the camera's USB mode to "Mass Storage". A firmware upgrade

cannot be performed with USB mode set to "PTP". See the camera's

reference manual for instructions on adjusting USB mode settings.

5. Confirm that the computer is on and ready for operation. Exit all software

applications.

6. Connect the camera to the computer with the USB cable.

7. Turn the Coolpix 2500 digital camera "On".

When the camera is connected to the computer, the camera will enter into

PC transfer mode.

8. Double-click the Uploader program icon to launch the uploader software.

9. When the message "Click 'Upload' button to start the update" is displayed,

click "Upload". After clicking the Upload button, the upload process cannot

be interrupted until the "Writing Firmware is complete" message is

displayed.