Nikon eclipse Ti-U Talimatlar Kılavuzu - Sayfa 21
Mikroskop Nikon eclipse Ti-U için çevrimiçi göz atın veya pdf Talimatlar Kılavuzu indirin. Nikon eclipse Ti-U 25 sayfaları. Inverted microscope
Sayfayı Yazdır
1.5
Dia Pillar Illuminator
Ti series microscopes can be used with the following two types of dia pillar illuminators. The two dia pillar
illuminators differ in lamp rating (12V 100W or 6V 30W) and support different microscopy methods. Select
the dia pillar illuminator to suit your application.
1.5.1
TI-DH Dia Pillar Illuminator 100W
The TI-DH Dia Pillar Illuminator 100W is used with a separate lamphouse and condenser.
The following illustration shows the TI-DH Dia Pillar Illuminator 100W with the D-LH/LC Precentered
Lamphouse and the TI-C Condenser Turret (System Condenser) attached.
Condenser mount
(rotatable)
Condenser mount
rotation clamp screw
Condenser centering
knob
TI-C System Condenser Turret
1.5.2
TI-DS Dia Pillar Illuminator 30W
The TI-DS Dia Pillar Illuminator 30W has a built-in lamphouse, but requires a separate condenser.
The following illustration shows the TI-DS Dia Pillar Illuminator 30W with the ELWD-S Condenser.
Condenser mount
Condenser holder
ELWD-S Condenser
Chapter 1 Part Names
1.5 Dia Pillar Illuminator
Filter sliders (both sides, 4 total)
Field diaphragm knob
Condenser clamp screw
Condenser lens
Figure 1-17 TI-DH Dia Pillar Illuminator 100W
(with Lamphouse and System Condenser)
Filter sliders (max. 3)
Dustproof slider
Figure 1-18 TI-DS Dia Pillar Illuminator 30W
(with ELWD-S Condenser)
Lamphouse (6V 30W lamp, sold separately)
(Requires TE-PS30W or TE-PSE30 power
supply.)
Field diaphragm slider
Device attachment screw holes (M4, x8)
19
D-LH/LC Precentered
Lamphouse LC
Requires TI-PS100W
power supply
Lamp cable
Condenser refocusing
clamp
Condenser holder clamp
screw
Condenser holder
(detachable)
Condenser focus knobs
(both sides)
Pillar locking clamp knob