Dirt Devil DDW01-E01 Kullanıcı Kılavuzu - Sayfa 16

Elektrikli Süpürge Dirt Devil DDW01-E01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dirt Devil DDW01-E01 20 sayfaları.

REmOvE THE BRUSHBAR

Note: Be sure to switch off the unit, unplug & remove the clean & dirty water tanks before servicing.

1. Flip your carpet washer on

its side like this.

3. Keeping tension

on the belt, use

two hands to lift

the brushbar up

and out.

2. Use a cross-head screwdriver

to remove the 3 screws here.

Now pull cover off.

4. Line up brushbar

with base, push

into place.

Make sure the

brushbar ends

are in the correct

orientation (A).

Caution

To reduce the risk of injury from moving parts, unplug

cleaner before servicing. Rotate brushroll manually to

make sure belt is not twisted or pinched.

5. Replace belt

cover and

secure with the

three screws.