Dirt Devil DDW01-E01 Kullanıcı Kılavuzu - Sayfa 17

Elektrikli Süpürge Dirt Devil DDW01-E01 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Dirt Devil DDW01-E01 20 sayfaları.

REPlACE THE BElT

1. Take off cover (refer to page

16). Remove and throw

away old belt. Clean any

debris from the spindle.

3. Line up brushbar with base,

push into place. Make sure

the brushbar ends are in

the correct orientation (A).

2. Place the new belt onto

the spindle, place other

end of belt on rounded area

of brushbar without bristles.

4. Replace belt cover and

secure with the three

screws.