3Com 3108 Kod Kılavuzu - Sayfa 10

Telefon 3Com 3108 için çevrimiçi göz atın veya pdf Kod Kılavuzu indirin. 3Com 3108 16 sayfaları. Nbx feature codes guide for sip telephones
Ayrıca 3Com 3108 için: Referans Kılavuzu (2 sayfalar)

Sayfayı Yazdır

1: F

HAPTER

EATURE

Using the NBX

NetSet Utility

Starting the NBX

NetSet Utility

ODES

For instructions on other supported features that your IP telephone may

support such as, dialing and answering calls, using speed dials, or

accessing a directory, refer to the documentation supplied with your

phone.

The steps for setting up and accessing your voice mailbox depend on the

type of voice messaging that is configured on your NBX system. Ask your

administrator what type of voice messaging is active on your system and

refer to the documentation that supports this voice messaging for

instructions.

The NBX NetSet utility has two interfaces:

Administrator — Your administrator logs in with a special password

and uses the NBX NetSet utility to manage and configure system-wide

telephone settings and many of the settings for your telephone.

User — As a telephone user, you log in to the NBX NetSet utility with

your own system ID (your extension) and password to:

View and change your telephone's personal settings, such as

where you want your calls to go when you cannot answer them

(your call coverage points).

View your call permissions and certain current feature settings.

For details about the NBX features you can access through the NBX

NetSet utility, view the online help.

To use the NBX NetSet utility, you need a computer that is connected to

your local area network (LAN) and that has a web browser. (You do not

need Internet access.) To start the NBX NetSet utility:

1 Ask your administrator for the IP address (or DNS host name) for your

NBX system. In the web browser on your computer (Microsoft Internet

Explorer version 5.5 or later is optimal), enter the IP address (or DNS host

name) in the Address field, and then press Enter. The NBX NetSet utility

You cannot log in to the NBX NetSet utility until you establish your

password through your telephone using NBX voice prompts or the

Feature Code sequence. See Password - Set Initially in

chapter.

2 Click User to log in as a user. The password dialog box appears.

Table 3

later in this