DIS Sensors QG40N Kullanıcı Kılavuzu - Sayfa 14

Aksesuarlar DIS Sensors QG40N için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DIS Sensors QG40N 15 sayfaları. Tilt/acceleration switch (sil1 plc)
Ayrıca DIS Sensors QG40N için: Kullanıcı Kılavuzu (5 sayfalar), Kullanım ve Güvenlik Kılavuzu (6 sayfalar)

Sayfayı Yazdır

Connection

The sensor is equipped with

Default:

Optional:

Pin Assignment

Pin 1 + Supply Voltage

Pin 2 Output2

Pin 3 Gnd

Pin 4 Output1

Pin 5 Zeroing

If connected with an optional PVC cable with 5-pins M12 Female(→ accessory sold by DIS)

Pin Assignment

Pin 1 Brown

Pin 2 White

Pin 3 Blue

Pin 4 Black

Pin 5 Green/Yellow

• The voltage supply must be dimensioned to prevent exceeding the specified voltage limits.

• The power consumption is about 50mA typical.

• This device must be connected to a class 2 power supply.

Customer takes care to only use good quality industrial connectors/cabling to connect the

sensor.

DIS SENSORS BV

User Manual - QG40N Tilt/Acceleration Switch (SIL1 PLc) V2.0

5-pins M12 connector male (A-coding). See datasheets for details

Cable with open ended wires. See datasheets for details

Figure 10 - Pin definition