DIS Sensors QG40N 사용자 설명서 - 페이지 14
{카테고리_이름} DIS Sensors QG40N에 대한 사용자 설명서을 온라인으로 검색하거나 PDF를 다운로드하세요. DIS Sensors QG40N 15 페이지. Tilt/acceleration switch (sil1 plc)
DIS Sensors QG40N에 대해서도 마찬가지입니다: 사용자 설명서 (5 페이지), 사용자 및 안전 매뉴얼 (6 페이지)
페이지 인쇄
Connection
The sensor is equipped with
Default:
Optional:
Pin Assignment
Pin 1 + Supply Voltage
Pin 2 Output2
Pin 3 Gnd
Pin 4 Output1
Pin 5 Zeroing
If connected with an optional PVC cable with 5-pins M12 Female(→ accessory sold by DIS)
Pin Assignment
Pin 1 Brown
Pin 2 White
Pin 3 Blue
Pin 4 Black
Pin 5 Green/Yellow
• The voltage supply must be dimensioned to prevent exceeding the specified voltage limits.
• The power consumption is about 50mA typical.
• This device must be connected to a class 2 power supply.
Customer takes care to only use good quality industrial connectors/cabling to connect the
sensor.
DIS SENSORS BV
User Manual - QG40N Tilt/Acceleration Switch (SIL1 PLc) V2.0
5-pins M12 connector male (A-coding). See datasheets for details
Cable with open ended wires. See datasheets for details
Figure 10 - Pin definition
13