Army Aviation TCS Series Manuel - Sayfa 10

Terazi Army Aviation TCS Series için çevrimiçi göz atın veya pdf Manuel indirin. Army Aviation TCS Series 19 sayfaları.

The accumulative function can be performed by pressing

【M+/SMPL】key ，the most accumulated times is 99.

Note ： Only when the stable symbol is displayed, the

accumulative function can be performed. The accumulative

function must be performed after zeroing the previous

accumulated value.

Put the object on pan and display weight value.

1. press【M+/SMPL】key to display"M-01"for short time and

1 second later, display the total accumulated weight value,

another 1 second later, return in weigh mode.

2. Take down the object and zero, put the other object on

pan again to perform the accumulative function many

times.

5.2 REDISPLAY FUNCTION

The redisplay function can be used to check accumulated

results and to examine accumulated messages time by time.。

1. One or more times accumulative operation can be

performed according to item 5.2