Army Aviation TCS Series 매뉴얼 - 페이지 10

{카테고리_이름} Army Aviation TCS Series에 대한 매뉴얼을 온라인으로 검색하거나 PDF를 다운로드하세요. Army Aviation TCS Series 19 페이지.

The accumulative function can be performed by pressing

【M+/SMPL】key ，the most accumulated times is 99.

Note ： Only when the stable symbol is displayed, the

accumulative function can be performed. The accumulative

function must be performed after zeroing the previous

accumulated value.

Put the object on pan and display weight value.

1. press【M+/SMPL】key to display"M-01"for short time and

1 second later, display the total accumulated weight value,

another 1 second later, return in weigh mode.

2. Take down the object and zero, put the other object on

pan again to perform the accumulative function many

times.

5.2 REDISPLAY FUNCTION

The redisplay function can be used to check accumulated

results and to examine accumulated messages time by time.。

1. One or more times accumulative operation can be

performed according to item 5.2