DiscoSmash DSR-X20 Kullanıcı Kılavuzu - Sayfa 9

Aydınlatma Ekipmanları DiscoSmash DSR-X20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DiscoSmash DSR-X20 17 sayfaları.

5. EDITING SAMPLES

For all the editing functions, you need to go to the edit

sample menu:

• Open the main menu by pushing "E".

• Go to "Samples" (1).

• Choose "Edit sample" (2).

• Choose the sound that you want to edit from the list. You

can listen by pusing the right arrow button.

• Push"E" when you found the sound that you want to edit.

Now you will see all the edit functions, which will be

explained here.

5.1 Cut

As explained before, sound files can be "cut" (adjusting of

beginning and end point).

Choose "Cut" (1) from the "Edit sample" menu.

Automatically the "begin" bar will be selected and you will

hear the beginning of the sound in a loop.

By moving the bar more left or right (using the navigation)

you can adjust the beginning point.

A counter will show how many seconds you are cutting.

When you finished with the beginning point, select the

"end" bar (using the down navigation button). Adjust this

also with the left and right buttons.

When you finished, save your settings with pushing "E".

If you don't want to save your changes, just push "STOP" to

go back.

Technical explanation:

The "cut" function will only adjust the point where the file

will start and stop playing. It will not delete this part from

the memory, so you can change it again later. If you want

to cut the file exactly like you want and delete the rest from

the memory, we advise that you use sound editing software

on your PC or laptop to make the sound perfect like you

want and then copy it using the external memory.