DiscoSmash DSR-X20 Kullanıcı Kılavuzu - Sayfa 7

Aydınlatma Ekipmanları DiscoSmash DSR-X20 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DiscoSmash DSR-X20 17 sayfaları.

4. ADDING NEW SAMPLES

If you want new sounds, you can choose to record them by

yourself (i.e. from your microphone, cd-player,...) or copy

them from the external memory. you can put sounds on

this external memorycard using your PC, copy from another

DSR-X20, buy cards from Discosmash with spoken texts or

sound effects,...).

To record your own samples, do the following:

• Open the main menu by pushing "E".

• Go to "Samples" (1).

• Open "New sample" (1).

• Choose "Record new sample" (2).

Now you have to choose if you want to record from:

• the input (connections marked with IN) (1).

• a Discosmash preamplifier (PA) (2).

After choosing this you can enter a name for your new

sound using the up, down, left and right buttons (up/down

to choose another letter, left right to go to the next or

previous letter of the name).

• When the name is complete, push "E".

• To start the recording, push "E" again. A counter will show

you how much time has been recorded already.

• You can stop the recording with pushing "STOP". The

recorded sample will now be saved

• After this is complete, you can push "E" to continue and

you will get back in the "New sample" menu.

• Before you can use this new sample it has to be mapped

to 1 of the 20 preset buttons. You can read how to do this in

chapter 5.5.

HINT:

You can adjust the beginning and end-points later, so make

sure you start recording on time, and don't stop too early.

You can still cut the sound later to make it perfectly like you

wanted.