Arnica HydraRain Pro Manuel - Sayfa 16
Elektrikli Süpürge Arnica HydraRain Pro için çevrimiçi göz atın veya pdf Manuel indirin. Arnica HydraRain Pro 20 sayfaları.
Sayfayı Yazdır
Operation manual Hydra Rain Pro
Thank you for purchasing the Hydra Rain pro. Every time you use your
vacuum cleaner with a water filter, you will be sure that you have
made the right decision. Our goal is to offer you more than the value
of your money. If you read the instruction manual carefully and try
out the vacuum cleaner, you will see how easy it is to use the device.
We hope you enjoy it.
Summary
1. Safety regulations
2. Presentation of the device and accessories
3. Installation and preparation for commissioning
4. Using the dry vacuum and wet vacuum
5. Cleaning and maintenance
6. Technical characteristics
1. Safety regulations
•
Please read the safety regulations implicit
•
Don`t use your device before reading the operation manual
•
Before using the device, check whether it corresponds to the
power and voltage of your electricity network. If not, you should
contact the shop where you purchased the device.
•
Be sure to connect your device to an earthed socket
•
If an extension cable should be necessary, please use an
extension cable with integrated grounding and a sufficient
nominal voltage for the power supply
•
Before transporting, cleaning or servicing the device, it is
essential to pull the plug out of the socket
•
Do not pull the plug out of the socket by the cable
•
Do not crush the cable, bend it excessively or lay. It in sharp-
edged places
•
If the cable or plug is damaged in any way, please do not switch
the device on. Contact the nearest authorized workshop so that
the damaged cable or plug can be replaced.
•
Always pull the power plug when the device is unattended or not
in operation. Children and people with physical or mental
disabilities must be supervised when using this device.
•
Do not allow members of the named groups of people to operate
the device
•
Particular care should be taken when cleaning stairs
•
Do not try to operate a defective device
•
Do not point thee suction tube at people or animals
16
•
Never immerse the housing of the device in water and avoid
spilling water over the device
•
Acids, acetone and solutions damage the device and can cause it
to corrode
•
Use only original spare parts and accessories
•
Contact the nearest authorized workshop for repairs and the
procurement of spare parts
CAUTION: Please do not vacuum up any ash or construction
site dust such as mortar, plaster, concrete, stone etc. with the
Hydra Rain Pro with water filter. The resulting damage to the device
is not covered by the warranty or guarantee.
CAUTION: Do not use your device to vacuum up gasoline,
thinner, alcohol, kerosene etc., flammable liquids, dust and
liquids with a temperature more than 60 °C, as well as objects that
can create a fire hazard or waste that is harmful to health. The device
you have purchased is intended for household use and should not be
used for business purposes or in workplaces.
2. PRESENTATION OF THE DEVICE
Components / device structure of the Hydra Rain Pro
A1. Motor unit
A2. Seperator disc
A3. Dirt collector
A4. Fresh water tank
A5. Chassis
3. INSTALLATION AND PREPARATION FOR COMMISSIONING
CATION: Before assembling and preparing for commissioning,
please be sure to pull the plug out of the socket.
•
Remove the fresh water connection hose from the motor unit A1
and the chassis A5. (Fig. 1)
•
Open both locks on the chassis A5 and pull out the motor unit A1
with dirt collector A3 and lift to the side. (Fig. 2 and Fig. 3)
•
Open both locks on motor unit A1 and pull motor unit A1 out of
dirt collecting container A3 and lift to the side. (Fig. 4)
•
Check that the motor protection filter (here blue) is firmly
seated. (Fig. 5)
•
Remove separator A2 from dirt collecting container A3 and take
replacement rubber caps B2 out of the container (Fig. 6). Check
that. The suction nozzle in the dirt collector A3 is firmly seated.
(Fig. 7)