Arnica HydraRain Pro Manuel - Sayfa 18

Elektrikli Süpürge Arnica HydraRain Pro için çevrimiçi göz atın veya pdf Manuel indirin. Arnica HydraRain Pro 20 sayfaları.

pull out the HEPA filter. If necessary, wash it with lukewarm

water.

•

Use only original spare parts and accessories. This is necessary for

effective vacuuming and for a long service life as well as for the

guarantee. If necessary, please obtain spare parts and accessories

from the nearest authorized workshop.

•

To clean the floor suction and spray nozzle B6, open the

transparent flap with two fingers (Fig. 24).

CAUTION: Please do not use any foaming agents to add water.

CAUTION: Please note the water in the water tank during the

suction process. If this starts to foam, switch off the device and

replace the water, otherwise the motor unit can suck in moisture and

damage the motor.

CAUTION: The foam develops especially after long running

times and when the water is very dirty, or because the vacuum

cleaner has sucked cleaning agent residues from your carpet or hard

floor.

6. TECHNICAL CHARACTERISTICS

Model:

Hydra Rain pro

Voltage:

220-240V~, 50-60 Hz

Power:

2400W max.

Electrical insulation:

Lengthofthepower cable: 8 m

ATTENTION:

• Remove suction connector in the dirt collection container A3

befor wet cleaning carpets or rugs!

GUARANTEE:

•Intheeventofanymalfunction,pleasecontact

Service & sales addresses:

SENUREuropeHaushaltsgeräteVertriebsGmbH

Zeppelinstr.4

85748Garchingb.München

Forquestionsand/orhelpwithinstallation,pleasecallourservicenumber

Tel:+49(0)8935651377