3D AEROWORKS TRACER 2000 Montaj Kılavuzu ve Kullanım Kılavuzu - Sayfa 9

Hava Araçları 3D AEROWORKS TRACER 2000 için çevrimiçi göz atın veya pdf Montaj Kılavuzu ve Kullanım Kılavuzu indirin. 3D AEROWORKS TRACER 2000 19 sayfaları. Thermal glider

Sayfayı Yazdır
5
Assembling the servo tray
-
Trim the servo arm down so that the fourth hole is the outermost hole.
-
Screw or hot glue the servos in place.
-
Glue the m6 nylon nuts in their slots in the underside of the servo tray.
-
Thread fishing line through the 4 holes at the rear of the tail and connect the ends to
the servo arms for both servo's. Place a drop of CA on the knot to secure it. Be sure to
leave plenty of excess to be attached to the elevators later on.