CubuSynth VCFA Oluşturma Kılavuzu - Sayfa 12
Müzik Pedalı CubuSynth VCFA için çevrimiçi göz atın veya pdf Oluşturma Kılavuzu indirin. CubuSynth VCFA 14 sayfaları. Multimode vcf with lp,hp and bp outputs and integrated vca
Ayrıca CubuSynth VCFA için: Manuel (5 sayfalar)
Sayfayı YazdırCubuSynth VCFA - Build Guide
STEP 14
Installing ICs and final check
3
2
Take the Main PCB and install the Ics. Make sure to install
the chips in their specific spot. Bend the Legs of the Ics
inwards a bit so they form a 90° degree angle to the body of
the chip. Make sure the orientation is correct, the notch has
to match the silkscreen / the sockets placed before.
Check your soldering. If you see shorts or bad solder joints,
fix it up. Then check the power pins for shorts with your
multimeter.
When everything looks fine, you can fit the control PCB, so
the Pin headers are connected properly. Then tighten the
Screws on the Main PCB to the standoffs.
Page 12
TL074
U1,U4,U5
LM13700N
U3,U2
PCB V1.2 Sept 2022