Aerial HF2 Series Kullanım Kılavuzu - Sayfa 6
Su Filtrasyon Sistemleri Aerial HF2 Series için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Aerial HF2 Series 17 sayfaları. Hepa filter
Sayfayı Yazdır
In this box you find tips and information concerning the use of
the device.
Designated use
The HEPA filter HF2 is designed for use with a side channel compressor or the
noise box VP2/VP3 as additional equipment for filtering mould spores and other
suspended solids in drying of the screed insulation layer using a vacuum
technique.
The HEPA filter HF2 is designed exclusively for use at atmospheric pressure.
Designated use also involves observing the specified operating conditions (refer
to page 6) and safety instructions (refer to page 4). Any use of the device going
beyond the designated use specified above is considered contrary to its
designated use.
Misuse is concerned if the HEPA filter HF2 is used for purposes not included in
designated use. In these cases the manufacturer does not assume any liability
for personal and material damage.
2
Safety
Safety devices
The HEPA filter HF2 was subjected to thorough safety testing. Improper
operation or misuse will cause danger to
the operator,
the device and other material property of the user,
efficient operation of the device.
All persons involved in the installation, commissioning, operation, maintenance
and servicing of the devices must
be properly qualified,
closely observe the instructions set out in this manual.
Hazards from accessories
Air hoses and air filters must be properly installed. The operating elements must
always be accessible.
Authorised operator
The HEPA air filter HF2 may only be operated by persons commissioned and
instructed by the user. In the working area the operator is responsible to third
parties. For all activities on the device the responsibilities must be clearly defined
and observed. Unclear competences are a safety risk.
SAFETY
Page 3 of 11