3DR Y6 Hızlı Başlangıç Kılavuzu - Sayfa 2
Dronlar 3DR Y6 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3DR Y6 8 sayfaları.
Ayrıca 3DR Y6 için: Montaj Kılavuzu (13 sayfalar)
Sayfayı YazdırThank you for purchasing a 3DR Y6!
Your 3DR Y6 comes fully assembled. Just complete this unboxing guide,
and your copter is ready to fly.
C ONT ENTS
3DR Y6 copter
You will need a 5.5 mm (7/32) wrench for minor assembly. We also
recommend a 2 mm (5/64) hex wrench for tightening propellers.
U N BOX ING
1
Unfold blue arms
Your copter's blue arms indicate its front-facing direction and arrive
folded for ease of transport.
Remove outer bolts
Locate the bolts at the corners of the body plate outside the blue arms.
Remove both bolts and nuts. These bolts will secure the blue arms in
place.
10 x 4.7 SFP (pusher) propellers (2)
10 x 4.7 SF (normal) propellers (1)
11 x 4.7 SFP (pusher) propellers (1)
11 x 4.7 SF (normal) propellers (2)
25 mm stainless steel bolts (3)
4 mm JP1 jumper connector
6 mm PPM jumper connector
Micro USB cable
Metal nuts (3)