3DR Y6 Hızlı Başlangıç Kılavuzu - Sayfa 3
Dronlar 3DR Y6 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 3DR Y6 8 sayfaları.
Ayrıca 3DR Y6 için: Montaj Kılavuzu (13 sayfalar)
Sayfayı YazdırTravel position
Fasten arms in place
Rotate blue arms away from black arm so your copter forms a Y.
Align the hole in the corner of the plate with the hole in the arm and
reinsert bolt into its original position. Ensure that bolt passes through
bottom plate, arm, and top plate. Use wrench to fasten each bolt with a
metal nut.
2
Secure legs
To unpack your copter's legs, simply slide leg into place and secure
using provided 25 mm bolts and nuts.
Travel position
Add bolt
Remove
Rotate leg back into the flight position as
shown above. The hole in the leg should
align with the hole in the arm. Insert a 25
mm bolt through leg and arm, and secure
with nut. Repeat for all three legs.
Slide arms into Y position
Secure with bolt
Flight position
Flight position