Camille Bauer SINEAX CAM Kullanım Talimatları Kılavuzu - Sayfa 10
Ölçüm Cihazları Camille Bauer SINEAX CAM için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Camille Bauer SINEAX CAM 19 sayfaları. Graphic display for sineax cam
Ayrıca Camille Bauer SINEAX CAM için: Kullanım Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
4.3 Measurement display of harmonics
Note: When monitoring the maximum values
of the harmonics, in fact the maximum value
of the THD resp. TDD is supervised. If a new
maximum value is detected, it is stored along
Present: Contains the present harmonic
contents as well as THD and TDD
Maximum: Contains the acquired maximum
values with timestamp
Reset maximum: Allows to selectively reset
the maximum values
Present
Each page shows a graphical overview of the
present harmonic contents (U or I) and the
value for one individual harmonic. The
displayed harmonic may be changed using
and
. Scaling may be adjusted using
select the next measurand use the key
Maximum
Each page shows a maximum THD (resp. TDD)
with timestamp, the corresponding harmonic
contents as well as the value for one individual
harmonic. The displayed harmonic may be
changed using
and
adjusted using
. To select the next
measurand use the key
Reset maximum
Maximum values of THD (voltage) resp. TDD
(current) along with their corresponding
harmonics may be reset by pressing
longer time (>1s). This can be done for all
values or selectively for the harmonics of
voltage or current only.
with the corresponding harmonic contents. This
way it's assured that the stored data belong
together and represent an image of the real
world.
. To
.
. Scaling may be
.
for a
10