Camille Bauer SINEAX CAM Kullanım Talimatları Kılavuzu - Sayfa 9
Ölçüm Cihazları Camille Bauer SINEAX CAM için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Camille Bauer SINEAX CAM 19 sayfaları. Graphic display for sineax cam
Ayrıca Camille Bauer SINEAX CAM için: Kullanım Talimatları Kılavuzu (12 sayfalar)
Sayfayı Yazdır
4.2 Measurement display of system quantities
The displayable measurements depend on
the configured system (type of connection).
The displayed measurement combinations
therefore may be different according to the
9
Present: Contains the instantaneous values of
the system
Minimum, maximum: Shows all acquired
minimum and maximum values with timestamp
Reset minimum, maximum: Allows to
selectively reset the acquired extreme values
Present
This predefined assembling of measurements
consists of multiple pages. The representation
can be switched from big (3 values) to small (6
values), or vice versa, using the key
select the next or the previous page use the
keys
and
.
Minimum, maximum
For selected measurements acquired maximum
and, if applicable, minimum values can be
displayed with timestamp (time of occurrence).
The selection of the page to display may be
done using
and
Reset min., max.
For all acquired extreme values or selectable
kinds of measurand, minimum and maximum
values may be reset by pressing
time (>1s).
Note: For measurands like the slave pointer IB it may
take several minutes until a new value is stored.
application. Details for the timestamp (time of
occurrence) used here may be found in the
chapter settings of the clock.
. To
.
for a longer