ClearCube clientcube 2 Hızlı Başlangıç Kılavuzu - Sayfa 5

Anahtar ClearCube clientcube 2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearCube clientcube 2 15 sayfaları. Secure kvm or secure km switch

Sayfayı Yazdır

Before You Begin

Personal and

product safety

Inspect

packaging

Not included in

package

Before setup

ClearCube Technology, Inc.

CAUTION:

Prevent ESD (electrostatic discharge) damage to ClientCube 2 and smart

card readers by always discharging your body and smart card before using

a reader (for example, by touching a grounded, unpainted, metal object).

ESD can vary depending on many environmental conditions, including

clothing that users wear and how they handle smart cards. ESD damage can

potentially cause unsupported card reader behavior including failure.

Always perform ESD prevention steps before using a card reader.

If ClientCube 2 packaging or hardware (including holographic seals on the Secure KVM or KM)

shows any evidence of disruption, call ClearCube Support immediately at (800) 652-3400.

Before installing a ClientCube 2, be sure to have

 a network cable for each zero client

 optionally, a network switch, and

 KM switch only: monitor cables.

The table below shows steps to take after unpacking a ClientCube 2.

Step

Ensure all required infrastructure is in place and is configured. Depending on your

deployment, this can include

 DHCP servers

 a copper network (including switches, routers, and so on)

 a fiber network (including media converters, switches, routers, and so on)

 VMware

View infrastructure, and

 CAC or smart card components and authentication/single-sign-on infrastructure

Record MAC addresses of zero clients and host cards for use during deployment and

configuration. (A configuration label on each ClearCube device specifies a MAC

address for the PCoIP device.)

If you are using physical computers with PCoIP host cards, download and install

audio and GPU drivers appropriate for your host card. ClearCube host cards only

support drivers available from ClearCube Support.

3700 W Parmer Lane

Action

Page 5 of 14

Austin, TX 78727

Continued on next page

P/N G0200161 Rev F, 1.5.01.19.2015

(512) 652-3500