ClearCube clientcube 2 Hızlı Başlangıç Kılavuzu - Sayfa 6

Anahtar ClearCube clientcube 2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearCube clientcube 2 15 sayfaları. Secure kvm or secure km switch

Sayfayı Yazdır
Before You Begin,
Before setup
(continued)

Setting up ClientCube 2 with KVM Switch

Set up
ClientCube 2
and KVM
ClearCube Technology, Inc.
Continued
Step
4
Optionally, install a CAC driver on any computing devices requiring CAC support.
5
If the ClientCube 2 includes a KM switch and you are connecting to computers with
multi-head displays, install the Belkin Advanced Secure KM Switch Mouse Filter
driver software (see www.clearcube.com/support).
CAUTION
The table below shows how to set up ClientCube 2 with a KVM switch.
NOTE
Follow the steps in the order listed below—be sure to connect all video cables
:
before connecting power to ClientCube 2 (note that connecting power
automatically powers on ClientCube 2).
Step
1
Connect Ethernet cables to ClientCube 2 zero clients.
2
Connect one or more displays to the Secure KVM Console Monitor Port(s).
3
Connect a keyboard and mouse to the Console portion of the Secure KVM.
4
Optionally, connect speakers and a CAC reader to the Console portion of the Secure
KVM.
5
Connect the ClientCube 2 power cable to a power outlet, and then connect the power
adapter to ClientCube 2.
Result: Secure KVM and zero clients power on.
3700 W Parmer Lane
Action
Be sure to remove this driver from computers before using the
computer without the Secure KM. Failure to remove the driver
results in loss of mouse functionality when connected directly to
a computer.
Action
Page 6 of 14
Austin, TX 78727
Continued on next page
P/N G0200161 Rev F, 1.5.01.19.2015
(512) 652-3500
www.clearcube.com