ClearCube clientcube 2 Hızlı Başlangıç Kılavuzu - Sayfa 8

Anahtar ClearCube clientcube 2 için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ClearCube clientcube 2 15 sayfaları. Secure kvm or secure km switch

Sayfayı Yazdır

Setting up ClientCube 2 with KM Switch

Set up
ClientCube 2
and KM
Configure KM
and monitors
Additional
steps
ClearCube Technology, Inc.
The table below shows how to set up ClientCube 2 with a KM switch.
NOTE
Be sure that ALL components (monitors, remote computers, zero clients, and so
:
on) are powered OFF before performing any of the steps below. Follow the steps
in the order listed below (note that connecting power automatically powers on
ClientCube 2).
Step
1
Be sure that all components (including monitors) are powered off as noted above.
2
Connect Ethernet cables to the zero clients in the rear of the ClientCube 2, and
connect the other end of the cables to the remote computers for each zero client
(through a network switch or by direct connection).
3
Connect one or more displays to the zero clients in the rear of the ClientCube 2 (see
in
"Before
step 5
4
Connect a keyboard and mouse to the Console portion of the Secure KM.
5
Optionally, connect speakers to the Console portion of the Secure KM.
6
Power on all monitors (do not power on any other devices yet).
7
Connect the ClientCube 2 power cable to a power outlet, and then connect the power
adapter to ClientCube 2.
Result: Secure KM and zero clients power on.
See the section below for KM and monitor configuration information.
The KM switch comes with many pre-defined monitor configurations and arrangements. You can also
create custom monitor arrangements. See the included Advanced Secure Keyboard/Mouse (KM)
Switch User Manual for detailed information about Seamless Cursor Switching (SCS), configuring
monitors, administrator mode, multi-head driver installation, and troubleshooting.
Optionally, install ClientCube 2 accessories including color chips to distinguish each port button. See
Secure KM Switch User Manual for more information.
3700 W Parmer Lane
Action
setup" on
page 6
about driver software for multi-head displays).
Page 8 of 14
Austin, TX 78727
Continued on next page
P/N G0200161 Rev F, 1.5.01.19.2015
(512) 652-3500
www.clearcube.com