ACOUSTIC SOLUTIONS DS 855 Kullanım Kılavuzu - Sayfa 8

Ev Sinema Sistemi ACOUSTIC SOLUTIONS DS 855 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ACOUSTIC SOLUTIONS DS 855 13 sayfaları.

LOUDSPEAKER CONNECTIONS

NOTE: Please ensure that the DS 855 is switched off before connecting any

speaker leads

Ensure the correct polarity (+) and (-) of all speaker leads. Check to make

sure there are no wires touching on the speaker terminals, and that all wires

are ﬁrmly clamped into the terminals (10, page 3).

FRONT L

SURR R

SURR L

CENTRE

FRONT L

SURR L

FRONT R

CENTRE

FRONT R

SPEAKERS OUT

SURR R

The speaker terminals on the rear of the DS 855 and rear of the speakers

have corresponding colour coded markings to ease identiﬁcation.

NOTE: When inserting speaker cables into any of the terminals, the black

wire should be ﬁtted into the - (negative) terminal, The grey wire into the +

(positive) terminal.

Please see the supplied Fast Setup sheet for hints and tips on connecting

and positioning of your speakers.

Now that you have connected your speakers to their correct terminals, you

can use the test function to ensure that all speaker are connected.

Selecting the TEST button on the remote control (4, page 4) activates the

test function. The standby/test LED on the front panel (1, page 3) will light

to indicate that the test mode is ON. The test function outputs a white noise

signal to each of the satellite speakers and subwoofer in turn in the following

order:

FRONT LEFT - CENTRE - FRONT RIGHT - REAR RIGHT - REAR LEFT - SUBWOOFER

To switch off the test function, press the TEST button on the remote control

again. The standby/test LED will now switch off.

If you do not hear a test noise from some of your speakers, switch off the

system and check the connections.