ClearSpan Storage Master Solarguard Kullanım Kılavuzu - Sayfa 18
Çadır ClearSpan Storage Master Solarguard için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. ClearSpan Storage Master Solarguard 20 sayfaları. Poly shelter round “hut” style 30' wide x 15' high x 48' long
Sayfayı Yazdır
Step 10: Remove the ropes and position the cover evenly on all four sides.
Warning: Do not leave the cover unattended until it has been secured in all four corners.
Step 11: In the front and rear hems, locate the black straps. Feed the strap through the center slot
in the ratchets and tighten down all four corners slightly. Do not tighten completely at this time.
Step 12: The hem containing the cover conduit needs to be slit or notched at each rafter where you
installed a ratchet. If your cover was not notched at the factory, continue with this step. Cut a 3"
long slit in the hem just above the cover conduit as shown below. Repeat this step on the other
side of the hem so you can pass a 2" wide strap over the conduit through the slits.
Note: If you already made small slits in Step 8 above, you can simply elongate these slits
centered on the rafter as required.
Step 13: Locate the yellow 5' straps and loop them over the conduit where the hem is cut out.
Step 14: Feed both ends of the straps through the slot in the ratchets and tighten slightly.
Page 18