ClearView POWER SLIDE Montaj Talimatları Kılavuzu - Sayfa 10

Otomobil Aksesuarları ClearView POWER SLIDE için çevrimiçi göz atın veya pdf Montaj Talimatları Kılavuzu indirin. ClearView POWER SLIDE 16 sayfaları.

Assembly Instructions

Aligning and Securing the Actuators

Align the actuators, then locate your clevis pin through the inner side and then push the clevis

pin through the inner hole provided.

Repeat this for the following side (Refer images 1 & 2)

Then secure the clevis pins with the clevis clips, attaching the clip from the outer side (Refer

image 3)

Once the Clevis clips are secure, you will need to cycle the Power Slide™ until the actuators

reach their home position.

Removing the Actuator ramp

Use a 5mm Allen key to undo the actuator ramps from the outside.

Gently remove the actuator ramps on both sides.

NB: Actuator ramps can be kept in box or discarded as they are only required for safe

transporting and flat packing of the Power Slide™.

You can now mount and secure the Power Slide™ into your vehicle if you haven't already

assembled this inside the vehicle prior.

clearviewaccessories.com.au