Edgewater Networks EdgeMarc 250W Hızlı Başlangıç Kılavuzu - Sayfa 4
Kontrolör Edgewater Networks EdgeMarc 250W için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. Edgewater Networks EdgeMarc 250W 6 sayfaları. Enterprise session border
controller
Ayrıca Edgewater Networks EdgeMarc 250W için: Donanım Kurulum Kılavuzu (19 sayfalar), Hızlı Başlangıç Kılavuzu (7 sayfalar)
Sayfayı Yazdır3. Plug one end of the power adapter into an AC outlet and the other end into the power
receptacle on 250W, denoted by "D" in the above diagram.
4. Connect one end of an Ethernet cable to local LAN port 1 of the 250W denoted by "C" in
the above diagram. Connect the other end of the cable to your computer's Ethernet port.
Make sure that the power LED is solid green on the front of the device as denoted by "A"
in the following picture. Make sure that the Ethernet LAN LED on the front of the device
is solid green or amber for the port to which the device is connected, as denoted by "B"
the following picture. This LED indicates that the link is up (consult the Hardware Install
Guide for more information about LED behaviors).