Edgewater Networks EdgeMarc 250W Посібник із швидкого старту - Сторінка 4

Переглянути онлайн або завантажити pdf Посібник із швидкого старту для Контролер Edgewater Networks EdgeMarc 250W. Edgewater Networks EdgeMarc 250W 6 сторінок. Enterprise session border controller
Також для Edgewater Networks EdgeMarc 250W: Посібник з встановлення обладнання (19 сторінок), Посібник із швидкого старту (7 сторінок)

Друкувати сторінку

3. Plug one end of the power adapter into an AC outlet and the other end into the power

receptacle on 250W, denoted by "D" in the above diagram.

4. Connect one end of an Ethernet cable to local LAN port 1 of the 250W denoted by "C" in

the above diagram. Connect the other end of the cable to your computer's Ethernet port.

Make sure that the power LED is solid green on the front of the device as denoted by "A"

in the following picture. Make sure that the Ethernet LAN LED on the front of the device

is solid green or amber for the port to which the device is connected, as denoted by "B"

the following picture. This LED indicates that the link is up (consult the Hardware Install

Guide for more information about LED behaviors).