dji M100-ZENMUSE X5 Series Kurulum Kılavuzu - Sayfa 11
Dronlar dji M100-ZENMUSE X5 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. dji M100-ZENMUSE X5 Series 15 sayfaları. Gimbal installation kit
Sayfayı Yazdır
5. Pull the battery's power extension cable through the hole on the battery cover and connect it to
the center frame's XT60 port.
6. Close the battery cover and tighten the screw.
Battery Power
Extension Cable
XT60 Port
Replacing the Landing Gear Leg
1. Unscrew the four landing gear legs from the frame arms and remove them.
2. Slide the new, longer landing gear leg into the notch of the antenna cover and screw it onto
the frame arm.
Be careful not to damage the antennas when replacing the landing gear legs.
DJI M100-ZENMUSE X5 Series Gimbal Installation Kit
©
2016 DJI. All Rights Reserved.
11