dji S800 Kullanıcı Kılavuzu - Sayfa 7

Dronlar dji S800 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. dji S800 16 sayfaları. Retractable landing gearfor spreading wings
Ayrıca dji S800 için: Manuel (3 sayfalar)

Sayfayı Yazdır

Mount Center Frame

Remove Screws

Step1: Mount IMU module into IMU position in the center frame. Ensure IMU casing is out of touch the

top board edge, as vibration can cause IMU mal-function.

Step2: Please mount DJI Autopilot System parts onto the bottom board (not including GPS modules).

Please remove all the screws from the bottom board first if necessary.

Step3: Connect Autopilot System and receiver. Please refer to DJI

Step4: Please mount the screws to bottom board, and use adequate screw glue.

Step5: Mount the GPS on the top board with a bracket.

Step6: Configure Autopilot System. Please refer to DJI

Notices:



Make sure to mount the IMU module at the IMU position first.



Mount the GPS with a bracket, to avoid interference from center frame power board.



Ensure the USB port of the M.C. outwards for easy access.



Please wire neatly. Make sure wires will not be cut by the edge of frames.

Tips:



Install screws with appropriate strength to prevent damage threads.

Fix Screws

WKM User Manual

WKM User

Manual.

for details.