ARTHUR HOLM Dynamic DB2 Montaj Kılavuzu - Sayfa 10

Monitör ARTHUR HOLM Dynamic DB2 için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. ARTHUR HOLM Dynamic DB2 13 sayfaları.

OPTION 1

- Veneer thickness must be accorded with factory

1. Check if the Veneer fits perfectly with the monitor. To join both parts correctly it is important that the two surfaces

are touching each other in the whole length.

2. Clean the top surface of the metal monitor housing and the

bottom surface of the Veneer.

3. Glue the Veneer. Double-side tape or glue can be used

(depending on the kind of materials are going to be jointed).

Veneer Guide (Optional)

The pressure applied

must not exceed 1 Kg

evenly distributed on

monitor surface.