3idee hp-pro-g6 Montaj Talimatları - Sayfa 4

Adaptör 3idee hp-pro-g6 için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. 3idee hp-pro-g6 5 sayfaları. Vesa adapter
Ayrıca 3idee hp-pro-g6 için: Montaj Talimatları Kılavuzu (7 sayfalar)

Sayfayı Yazdır

Assembly instruction

Step 1

Remove the base of your HP All-in-One PC.

We have also published an assembly help video.

Step 2

Now place the 3idee VESA adapter on the mount and tighten

it with the 2 screws provided. (Figure 1)

Step 3

This is how the mounted VESA adapter should look now.

Please make sure that you have tightened both screws.

(Figure 2)

Step 4

For this step we recommend a 2nd person.

Now lift the monitor and hold it to your monitor mount.

Fasten the VESA adapter with the 4 included M4x14 screws

(screw bag: SP2).

It is best to fasten 2 screws diagonally first, so that the

monitor cannot fall down and you can fasten the remaining

screws without any effort.

ATTENTION: Pay attention to the right screws!

Assembly

instructions

Figure 1

Figure 2

Figure 3