3idee hp-pro-g6 Інструкція з монтажу - Сторінка 4
Переглянути онлайн або завантажити pdf Інструкція з монтажу для Адаптер 3idee hp-pro-g6. 3idee hp-pro-g6 5 сторінок. Vesa adapter
Також для 3idee hp-pro-g6: Інструкція з монтажу Посібник з монтажу (7 сторінок)
Assembly instruction
Step 1
Remove the base of your HP All-in-One PC.
We have also published an assembly help video.
Step 2
Now place the 3idee VESA adapter on the mount and tighten
it with the 2 screws provided. (Figure 1)
Step 3
This is how the mounted VESA adapter should look now.
Please make sure that you have tightened both screws.
(Figure 2)
Step 4
For this step we recommend a 2nd person.
Now lift the monitor and hold it to your monitor mount.
Fasten the VESA adapter with the 4 included M4x14 screws
(screw bag: SP2).
It is best to fasten 2 screws diagonally first, so that the
monitor cannot fall down and you can fasten the remaining
screws without any effort.
ATTENTION: Pay attention to the right screws!
Assembly
instructions
4
Figure 1
Figure 2
Figure 3