Artico SY-AC900 Kullanıcı Kılavuzu - Sayfa 8
Klima Artico SY-AC900 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artico SY-AC900 13 sayfaları.
Ayrıca Artico SY-AC900 için: Kullanıcı Kılavuzu (16 sayfalar)
Sayfayı YazdırIncorrect installation
•
It is important to keep the exhaust duct clean and smooth. Incorrect installation will
affect the functioning of the A/C.
•
Prevent bending the exhaust pipe.
•
Ensure air can flow smoothly in the duct.
Warning:
The exhaust duct is designed especially for this model.
Do not replace or stretch it or it will result in failure.
Notice:
The maximum developed length of the exhaust duct is 1,500 mm.
Shorten its length as far as possible while in use. Keep it horizontal while installation.
Operation method
Cooling mode
•
When the A/C enters into the cooling mode automatically or the cooling mode is
selected after the power is turned ON, the cooling indicator lamp lights up.
•
Press the Up/Down key to adjust the temperature (16 ºC ~30 ºC).
•
Press the Speed key to select between High, Medium and Low speed.
Fan mode
•
Press the mode button on the control panel or the remote control to choose the Fan
mode, the wind indicator lamp will turn on.
•
Press the Speed button to select between High, Medium and Low speed.
•
The temperature cannot be set under fan mode.
Dehumidification mode
•
Press the mode button on the control panel or the remote control to select the
dehumidification mode. The dehumidification indicator lamp lights up.