DJTECHTOOLS Midi Fighter 3D Kullanıcı Kılavuzu - Sayfa 12

Medya Dönüştürücü DJTECHTOOLS Midi Fighter 3D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJTECHTOOLS Midi Fighter 3D 19 sayfaları.

Device Settings

On the left side of the Utility interface are a number of device hardware settings.

MIDI Channel

This sets the base MIDI channel that the Midi Fighter will send and receive MIDI data on. The

Midi Fighter 3D uses 3 channels and the second and third channels will follow the base

channel sequentially.

MIDI Velocity

The Midi Fighter triggers & buttons are not velocity sensitive. This setting sets the default

velocity for Note On messages from the Midi Fighter.

Software Mode

When this option is set to Ableton the Midi Fighter 3D arcade triggers will send both Note &

Control Change messages. This is useful when using the device in Ableton as it allows you to

map momentary control of FX to the arcade triggers, whereas Note On messages will only

provide toggle control. Setting it to Traktor will only send Note messages.

Combos

The Combos check box enables sending of 'Super Combo' MIDI notes. These are special

notes sent only when speciﬁc patterns of arcade triggers are pressed, just like an arcade

game. The full details of the super combos are secret, but details can be found on the Midi

Fighter forum!

Sleep Timer

The Midi Fighter 3D can be conﬁgured to sleep after a certain period of inactivity. You can

conﬁgure the sleep timer to be between 0 and 120 minutes. A setting of 0 will disable sleep.

Pressing any key will wake the Midi Fighter from sleep.

Bank Buttons

When this option is enabled you will gain access to the 4 built in virtual banks. If you decide

to disable it you can set the Bank Buttons behaviour to either hold or toggle.

Bank Side Buttons

The 6 side buttons are ﬁxed and send the same notes regardless of which bank is selected

unless this option is enabled.

Animations

The animations section allows you to conﬁgure the various global animations settings for the

Midi Fighter 3D display.

Spark

Spark enables an animation where a burst of sparks shoot across the display with each

press of an arcade trigger.

! 1 2