DJTECHTOOLS Midi Fighter 3D Kullanıcı Kılavuzu - Sayfa 3

Medya Dönüştürücü DJTECHTOOLS Midi Fighter 3D için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DJTECHTOOLS Midi Fighter 3D 19 sayfaları.

The Midi Fighter 3D Hardware

This section describes the hardware & MIDI operation of the Midi Fighter 3D in detail and

should be used as a reference when creating your own MIDI mapping in your software of

choice.

This section assumes that the reader is already familiar with the basics of the MIDI protocol.

Introduction

The Midi Fighter 3D consists of 16 arcade triggers with MIDI controlled full color ring

illumination, 4 user conﬁgurable top mounted bank buttons, 6 user conﬁgurable buttons

mounted on the side of the device and multiple axis motion controls (tilt & rotation). The side

buttons have no LED illumination.

Each of the 16 arcade triggers will send a different note in each bank, allowing access of up

to 64 unique notes across the four banks. By default any side button MIDI Notes or CC's are

also unique for each bank, this behaviour can be disabled with the Utility by unchecking the

"Bank Side Buttons" option.

For a full description of the bank operation refer to the virtual bank section.

! 3