Artison RCC300-FS Kurulum Kılavuzu - Sayfa 11

Subwoofer Artison RCC300-FS için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Artison RCC300-FS 15 sayfaları.

IR FEEDTHRU

1. Connect a ⅛" Stereo MINIJACK to control the RCC600-SA via your integrated control

system.

2. Both the IR Feedthru Jack and the Front Panel IR receiver are designed to allow the User

functions to be programmed into an external remote. The Hexadecimal codes for the

amplifier are located on the web at:

POWER MODES

1. Select either:

ON – Always On.

AUTO – On with Signal Sense, without signal it will stay on for ≈15 minutes.

TRIGGER – On with a 12 Volt trigger.

2. +12V Trigger Input – Use the Green Phoenix Connector to connect a 12 volt trigger wire

from your other equipment, the polarity on the connector can be either way.

http://www.artisonusa.com