DK-TEC BCRI Kullanıcı Kılavuzu - Sayfa 4

Çiftlik Ekipmanları DK-TEC BCRI için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DK-TEC BCRI 15 sayfaları. Flail mower

For your protection:

● Read and understand the "Safety labels" section. Read all the instructions given on

them.

Shutdown and storage:

● Lower the flail mower to the ground, set the tractor's parking brake, turn off the

engine and take the ignition key.

● Place the machine in an area where children do not normally stay. Secure the machine by

using various covers and supports.

Use safety lights:

● Slow tractors, self-propelled machines and towed implements can create danger when

driving on public roads. They are difficult to see, especially at night.

● Flashing lights are recommended when driving on public roads. Use lights and parts

supplied with the flail mower

Safe transport:

● Comply with state and local laws.

● Maximum transport speed for the flail mower is 20 km/h. Do not exceed this

speed. Uneven terrain requires a lower speed.

● Sudden braking can cause a towed unit to spin. Reduce speed if the towed unit is not

equipped with brakes.

● Follow the following maximum speed:

20 km/h when the load is less than or equal to the weight of the tractor. 10

km/h when the load is twice the weight of the tractor.

IMPORTANT: Do not tow a unit that is more than twice the weight of the tractor.

Do not have passengers on the flail mower:

● Passengers obstruct the operator's view. Passengers may be thrown from the flail mower.

● Never let children operate the flail mower.

Safe maintenance:

● Understand the procedure before doing the work. Use suitable tools

and equipment. See operating instructions for further information.

● Work in a clean and dry area.

● Lower the machine to the ground, set the tractor's parking brake, turn off the engine, and

remove the key before performing maintenance.

● Allow machine to cool completely before maintenance.

● Do not lubricate the machine with grease or oil while the machine is running.

● Inspect all parts. Make sure all parts are in good condition and properly installed.

● Remove excess grease, oil or dirt.

● Remove all tools and unused parts from the machine before operation.