DK-TEC SPLSE2204 Kullanıcı Kılavuzu - Sayfa 12

Medya Dönüştürücü DK-TEC SPLSE2204 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DK-TEC SPLSE2204 16 sayfaları. Mobile wood splitter, 22 tons

Sayfayı Yazdır

•

Use the outrigger to prevent the wood splitter from moving during operation and to block

both decks.

•

Place the wood splitter in a horizontal position.

•

Lay a piece of wood against the wedge. (Maximum length: 54 cm)

•

Make sure your hands are away from the crush areas and the wedge.

Cautious!

•

If a piece of wood is stuck or will not split, push the control lever in the opposite

direction to remove the wood from the wedge.

•

If the piece of wood is still stuck or will not split, turn off the machine and use a

sledgehammer to remove the piece of wood.

•

Always keep your hands away from the piece of wood and the wedge while pulling it back.

5. Operation of the clover

Used only for horizontal splitting

Transport position

Support wheels. Must

be raised during

transport

Press the lever down

and lock carefully

Security split for use by

transport of the clover