Artiste E1 Kullanıcı Kılavuzu - Sayfa 10
Kulaklık Artiste E1 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Artiste E1 10 sayfaları. 2.4ghz wireless induction neck-loop headphone
Sayfayı Yazdır
Try using a different connection RCA, OPTICAL or HEADPHONE.
-
Distortion
The charge level of the battery inside the Receiver may be too low. Recharge the battery or
-
replace them with a fully charged battery.
The Receiver may be too far away from the Transmitter. Move closer to it.
-
The audio signal input level may be too low. Increase the volume from the audio source.
-
The audio signal input level may be too high, lower the volume from the audio source.
-
In case the Neck Loop Receiver cannot be linked with the Transmitter. Please follow the
following procedure for Pairing:
1.
Turn OFF the power of the Transmitter.
2.
Turn ON the Receiver.
3.
Press and Hold the MIC Button for about 5 seconds, the Green LED flash quickly in the
Receiver, then turn ON the power of the Transmitter.
4.
The Receiver and the Transmitter is then Paired automatically, and the Green LED on the
Receiver lights steadily.
5.
One Transmitter can be connected to several Receivers as above.
TECHNICAL SPECIFICATIONS
Transmission mode: Digital Hopping System
Carrier frequency: 2.4GHz ISM BAND l
Operating voltage: Transmitter 5V
Receiver 3.7 V Lithium Polymer Battery
Frequency response: 20 Hz – 20 KHz
Distortion: 0.5%
Signal-to-noise ratio: 85dB
Work Time: 6 hours
Charge Time: 3 hours
Range: Up to 30 meters (open area)
MADE IN CHINA