CUSTOM ULTRASONICS 20000 Operatör El Kitabı - Sayfa 2

Depolama CUSTOM ULTRASONICS 20000 için çevrimiçi göz atın veya pdf Operatör El Kitabı indirin. CUSTOM ULTRASONICS 20000 7 sayfaları. Endoscope storage cabinet
Ayrıca CUSTOM ULTRASONICS 20000 için: Operatör El Kitabı (11 sayfalar)

Sayfayı Yazdır

CUSTOM ULTRASONICS, INC.

ODEL

HYSICAL

ESCRIPTION

Model 20000 Endoscope Storage Cabinet

The

channels with forced air during storage. It is fabricated of painted steel to provide an environment

for endoscope storage that is free of water-absorbent materials [e.g.: laminated wood] to minimize

the risk of endoscope bacterial and/or fungal growth.

The cabinet has been designed to accommodate up to (8) flexible endoscopes. The actual number

that the cabinet accommodates will depend on the configuration or "design" of the endoscopes.

A gasket surrounds the door opening. When the door is closed (by the adjustable and lockable

handle), the gasket is compressed providing a sealed enclosure.

At the top of the cabinet is an enclosure containing an air pump for the circulation of air through

the channels of the endoscopes. Next to the air pump, on the other side of the upper enclosed area,

is a chamber for desiccant bags that are used to absorb moisture from the re-circulated air. Two re-

sealable plastic containers, each containing 6 desiccant bags, are provided with the initial Cabinet

purchase. One package of (3) Humidity Indicator Cards are also provided. (Additional bags and

cards are available – Desiccant bags Part # 20001 – Humidity Indicator Cards Part #20003)

A series of "vents", located on the bottom of the desiccant chamber, allows for air movement

through the desiccant and into the air pump for re-circulation through the endoscopes' internal

channels.

By opening the desiccant chamber door, the bags of desiccant can be removed, regenerated and

replaced. [Refer to the maintenance section later in this manual.]

Below the desiccant bags and air pump chamber, at the top of and inside the main chamber of the

cabinet, is a manifold containing several bulkhead fittings. Adapters are used to connect the

endoscope to these bulkhead fittings. Circulation of air through the endoscopes' internal channels

occurs via these adapters. Although a relief valve protects the air pump in the absence of adapters

plugged into the bulkhead fittings, one adapter must be connected to the manifold.

A holding compartment for the endoscopes' operating buttons is located inside the door of the

cabinet.

The storage cabinet's ON/OFF main switch and the adjustable programmable timer are located

outside of the cabinet on the right front wall.

Each

Model 20000 Endoscope Storage Cabinet

cabinet may reduce the incidence of endoscope theft.

SHEET

2 OF 7

20000 E

NDOSCOPE

REVISION

TORAGE

ABINET

continuously purges each of the endoscopes'

is equipped with a lock. Routinely locking the

20000 E

ODEL

NDOSCOPE

TORAGE

ABINET

PERATOR

ANUAL