Alumax Stickstall 794 Series Kurulum Talimatları Kılavuzu - Sayfa 2

Duş Kabinleri Alumax Stickstall 794 Series için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Alumax Stickstall 794 Series 11 sayfaları. Shower enclosure

Sayfayı Yazdır
A
B
LUMAX
ATH
and users, that the products supplied by it shall be free from material defects in material
and workmanship for a period of one (1) year after shipment, provided they are installed and
maintained according to A
instructions.
This warranty shall apply only to defects appearing within one (1) year from
the date of shipment, and provided that A
writing of such defects.
or with respect to any other claim relating to defects or any other condition or use of the
products supplied by A
is based upon warranty contract, negligence, strict liability, or any other theory, is limited
to repair or supply of such products, or repayment by A
purchase price paid for it, at A
A
B
E
LUMAX
ATH
implied, including, but not limited to, any implied warranty of merchantability and any
implied warranty of fitness for a particular purpose.
E
be liable for special, direct, indirect, or consequential damages, including, but
NCLOSURES
not limited to, loss or use of profits.
Dealers agree to pass on to its customers and users in writing A
Warranty and Remedy as set forth above.
Laws and building and safety codes governing the design and use of bath enclosures vary
widely.
A
LUMAX
operating hardware or glazing materials, and assumes no responsibility therefor.
Unpack your unit carefully and inspect for freight damage.
using the instruction sheets as a reference.
hardware bags that tend to fall to the bottom of the box.
missing, refer to the descriptions noted in the instructions when contacting your dealer for
r e p l a c e m e n t s .
Handle the glass panels carefully and protect the edges.
resistant to breakage, but it can be broken by banging the edges against a hard surface.
sharp corners of the panels can damage tile and floor surfaces, so do not remove any
protective devices until you are ready to install the glass.
Please wear safety glasses whenever drilling or cutting.
or marble, use a center punch and hammer to carefully break the surface glaze so the drill
can start without skidding.
To install your A
measure, level, #2 Phillips screwdriver, drill, 1/8" and 3/16" drill bits, 3/16" wrench,
hacksaw, mallet or hammer, wood block, razor or sharp knife, pencil, glass cleaner, and
caulking (clear silicone recommended).
to length, files, center punch and masking tape.
EPH-N00-06003
5-20-97

LIMITED WARRANTY AND REMEDY

E
warrants to its dealers, customers, and all subsequent purchasers
NCLOSURES
B
LUMAX
The sole and exclusive remedy with respect to the above warranty
B
LUMAX
ATH
LUMAX
does not make any other representations or warranties, express or
NCLOSURES
B
E
ATH
NCLOSURES

INSTALLATION NOTES

S
LUMAX
TIKSTALL
E
's recommended practices and installation
ATH
NCLOSURE
B
LUMAX
ATH
E
, however caused, and whether such claim
NCLOSURES
B
E
ATH
NCLOSURE
does not control the selection of product configurations,
Before discarding the carton, check for small
Shower Enclosure you will need the following: tape
Optional tools include a miter box for cutting parts
Page 2 of 11
E
is promptly notified in
NCLOSURES
B
E
LUMAX
ATH
NCLOSURES
's option.
In no event shall A
B
LUMAX
ATH
Lay out and identify all parts
If any parts are damaged or
Safety tempered glass is very
When drilling holes in ceramic tile
of the
B
LUMAX
ATH
E
's
NCLOSURE
The